PLACEHOLDER Leather Shot Pouch. Material: leather, metal. Size: 8 1/2" x 3 1/2" x 1". Description: half a leather pouch, tear drop shape, dog graphic raised on leather attached to copper cylinder via 1 screw; copper cylinder has a neck where the opening of the leather pouch would be and a measuring devise on one side that moves by pushing a round end of the lever,forcing it through the bottom disk opening and lifts an upper disk out of a horizontal hole, there is another hole above it; lever ... more

Material: metal, glass, paper. Size: 3" diameter x 12 3/8" L. Description: black fabric over cardboard tube - glass lens at one end - high polished wood attached to a gold toned metal neck on other viewing end.

Policeman's Uniform Belt. Material: leather, metal. Size: waist belt: 3 1/8" W. x 49" L.; shoulder strap: 1 1/2" W. x 41 1/2" L. Description: black leather belt with decorative design on back, brass buckle closure with two hooks on buckle end and knob on tab end with two more closure hooks; sliding cartridge holder attached on right side holds twelve cartridges; shoulder strap attached on left side to brass ring on belt, adjustable length buckle on the end.

Material: leather, metal. Size: 4 1/2" W. x 13 1/4" L. Description: dark brown leather - tapered to fit gun handle and barrel - two snap riveted closure (one missing) - stamped beside snap: "A.M.B.Y.F. Colts 8" - two leather belt loops riveted on holster.

Material: leather, metal. Size: 2 1/2" W. x 42 1/2" L. (belt) - 2 1/2" W. x 6 1/2" L. x 2" D. (holster). Description: black leather belt - silver tone metal side adjusting buckle - closure with a brass disk (stamped "Police") that fits into a slot encircled with a decorative wreath design - leather loop on holster slides onto belt.

Material: leather. Description: brown suede - rectangular shaped - spoon sheath - top stitched around two sides - handwritten in pen on one side: "666 F.H. Hugunin"

Grenade Carrier. Material: metal, textile. Size: 6 3/4" W. x 10 1/8" L. x 2" D. Description: green cotton canvas bag, three vertical pocket closures with two heavy metal snaps; black stamped inside top pocket: "Carrier, Grenade, 3-Pocket Stock No. 74-C-124 KayPey Manufacturing Co. 1945", "U.S." stamped on top pocket flap; two cord ties attached to back bottom; two metal attaching hooks at top back.

Gun Powder Measure. Material: wood, metal. Size: 3/4" W. x 1" H. x 5 3/8" L. Description: cylindrical metal cup with capacity markings for "Powder Drs" (drams) on one side of adjustable lever and "Shot Oz" (ounces) on other side; cup shank attaches extended handle to measuring cup.

Muzzle Cap. Material: metal. Size: 2" diameter. Description: light weight tarnished tin, straight sided with stamped top lid: "100 Waterproof-Man'd By A_er Flask & Cap Co., Waterbury, Ct., Percussion Caps, B_icks Anti-Corrosive". Contents: 40 caps, 3/8" diameter; 1 jagged green stone, 3/8" L.; 1 cartridge casing, 3/8" W. x 3/4" L.; 1 circular metal pin, 1/2" diameter; 1 shanked hollow core pin with slot in head, 1/8" W. x 3/4" L.

Herter's Weight Deocys. Material: metal. Size (each): 3" W. x 4 3/4" L. Description: iron ring (set of 8); attaching loop at top; five of the loops are stamped: "Herters, Waseca, Minn."

Herter's Skeet Target. Material: plastic. Size: 4 1/4" diameter. Description: black and yellow plastic; circular disk with raised yellow top; stamped in top surface: "Herter's Inc. U.S.A." and a four-leaf clover graphic.

Gun Powder Measure. Material: wood, metal. Size: 1 3/4" W. x 5 1/2" L. Description: tin cylinder cup at one end attached to extended wooden turned handle with adjusting screw; stamped on metal cup: "Powder Drams, Shot Oz."; stamped inside metal head: "PAT NO V2386 BGI CO."

Material: wood. Size: 1 3/8" W. x 4 1/4" L. Description: wooden shank with tooled knob on one end.

PLACEHOLDER

Civil War Military Cartridge Box and Scabbard. Material: leather and metal. (a) Belt. Size: 1 1/2" W. x 40 1/2" L. with attached scabbard 1 1/4" W. x 11 1/2" L. Description: brown leather belt with oval metal buckle - hand scratched on reverse side: "F M". (b) Bayonet fragment. Size: 3/4" W. x 4 1/4" L. Description: metal bayonet end piece of scabbard; leather cap pouch, lined with textile and with metal closure button (3 1/2" W. x 3" L.) attached to belt; stamped on scabbard: "Wilkinson and ... more

Leather Cartridge Case. Material: leather, metal. Size: 12 1/4" W. x 6" D. x 7" H. Description: natural leather case, metal lines; top flap closure with metal clasp and two leather straps; leather carrying grip on top anchored on each end with metal loops; metal identification plate on front; four inside compartments; four metal peg feet on bottom.

Material: leather, metal. Size: 2 1/8" W. x 40" L. Description: brass tube screwed into leather belt at one end - leather shoulder strap fastens with metal buckle in side extension.

Gun Powder Flask. Material: metal, leather. Size: 5" W. x 2 1/2" D. x 10" L. Description: copper gourd-shaped container with a narrow distribution neck at top, thumb flow control lever extends from neck side, leather shoulder strap attached to two hooks on flask side.

Material: metal. Size: 3" W. x 5" H. Description: brass tool - oval shaped base stamped "Trade Mark Despatch Recapper C&J W. Hawkslet 12" - vertical brass barrel on right side - two-sided turning handle mounted on vertical shaft adjusts upward and downward movement of brass screw - brass holding ring extends outward from one side of shaft - under side painted red.

Leather Scabbard. Material: leather and metal. Size: 19" L. Description: brown leather - triangular shaped to fit bayonet - crescent shaped strap on one end for belt attachment - leather belt attachment -silver metal buckle - two copper rivets hold strap to scabbard - 3 1/4" L. brass tip at point of scabbard - acorn shaped finial at tip.

Wooden Duck Decoy. Material: wood, cork, textile, metal. Size: 6 1/2" H. x 11" L. Description: white and brown painted cork - duck shaped - green, white and brown painted wood head - yellow string wrapped around neck - metal bolt tied to end of yellow string - part of a white and red sticker label on bottom: "41850." (or 91850)

Spotting Telescope Attachment. Material: metal, glass, paper, textile. (a) Scope. Size: 1 1/8" diameter x 4 5/8" L. Description: black coated brass hollow cylinder - threaded on one end with tiny glass center lens - larger opening at other end - glass lens inside (loose). (b) Case. Size: 1 1/2" diameter x 3 1/2" L. Description: black cotton over cardboard - hollow tube open at one end. (c ) Cap. Size: 1 1/8" diameter x 2 1/8" L. Description: black cotton over cardboard - hollow tube open at ... more

Material: leather, textile, metal. Size: 9" W. x 31 1/4" L. Description: brown leather - gun shaped case - leather closing strap and metal buckles, leather grip handle across long horizontal top.

Herter's Cartridge-Case Press. Material: plastic, metal. Size: 10" W. x 23 3/4" H. Description: brass case; green and yellow tubular plastic cases at top labeled: "Powder" and "Shot"; small handle on side; four black metal tubes and three silver tubes in center section; large operating handle on side; on base: "Herters Inc Waseca Minn." "Model 72 Super Pat Pend."

Herter's Gunstock Finishing Kit, No. 12. a) Herter's Gunstock Finishing Kit Instructions Booklet, 1952. Material: paper. Size: 4" x 5 3/4". Description: white cover; black print: "Herter's Gunstock Finishing Kit Instructions, Herter's, Inc., Waseca, Minnesota, U.S.A."; black and white photo of Herter's Gunstock Finishing Kit; Herter logo in lower left corner; 15 pages. b) Sandpaper. Material: paper. Size: 4" x 5 1/2". Description: Nine pieces of sandpaper. c) Felt Stock Finishing Pad. Si ... more